Konica Minolta bizhub 362 User Manual page 260

11
6
Press [F-CODE].
7
Specify settings for "F-CODE", "F-
CODE Password", and "Remote
Input Check".
8
Specify how received documents are
handled.
– Press [RX Doc. Settings], select
the operation to be performed,
and then press [Enter].
9
If "RX Doc. Settings" was set to
"Forward", specify a destination.
– To add a new forwarding
destination, press [Next
Destination].
– To view the details of the
forwarding destination, select the
destination, and then press
[Detail].
– To delete a forwarding destination, select the destination, and then
press [Delete].
10
Press [Enter] in each screen until the standby screen (initial screen)
appears.
11-60
Utility mode
bizhub 362/282/222