Selecting One Destination; Using The Direct Input Screen - Konica Minolta bizhub 362 User Manual

3
3.5

Selecting one destination

The following methods can be used when selecting 1 destination.
- Keypad.
- One-Touch: Specify a recipient registered with a one-touch dial button.
- Program.
- Search: Search for a recipient registered with a one-touch dial button.

Using the direct input screen

1
Press the [Fax/Scan] key to display the Fax mode screen.
– If desired, press [Quality & Reduction] or [FAX Menu], and then
specify the desired settings. For details on the settings available on
the Quality & Reduction screen, refer to "Setting transmission
conditions" on page 3-10. For details on the settings available on
the FAX Menu screen, refer to "Transmission" on page 3-3.
2
Press [Direct Input].
3
Use the keypad to type in the fax number for the recipient.
If desired, enter a tone or a pause.
– Tone: If pulse dialing is being used, press this button to send a
push-button tone. This is used when a fax information service is
being used. "T" appears in the screen.
– Pause: Press this button to insert a pause when dialing. Press
[Pause] once to insert a 1-second pause. In addition, multiple
pauses can be entered. "P" appears in the screen.
– To erase the entered number, press the [C] (clear) key.
– To select multiple recipients, press [Add], and then specify the next
number.
– When faxing overseas, depending on the destination, a
transmission error may occur if the transmission conditions are
poor. In this case, press [Overseas] to decrease the transmission
speed and allow the fax to be received more easily.
3-20
Transmission
bizhub 362/282/222