Konica Minolta bizhub 362 User Manual page 249

Utility mode
5
Use the keypad to type in the current
two-digit communication password,
and then press [Next].
The password appears as "**".
6
Press [New Password], type in the password, and then press [Enter].
7
Press [Confirm New Password], type in the password again, and then
press [Enter].
8
Check the information to be registered, and then press [Enter].
9
Press [Enter] in each screen until the standby screen (initial screen)
appears.
bizhub 362/282/222
11
11-49