Konica Minolta bizhub 362 User Manual page 301

Utility mode
Bit
5
4
3
2, 1, 0
*1
If bit 6 is set to "1", the settings will not be applied if bit 5 is set to "1" (not
displayed). If you do not wish to display the fax number or address of the
recipient, bit 6 must also be set to "1" (settings can only be specified in
Administrator mode).
*2
If the recipient is directly specified from the Direct Input tab, the recipient
is displayed, even if "1" (not displayed) is selected.
bizhub 362/282/222
Description Setting
Specifies whether or 0
not only recipient
1
names are displayed
(and the fax number
or address is not
displayed) in reports
and Job List screens
and when a one-
touch dial button is
* *
touched. 1, 2
----------------------- 0
Specifies whether or 0
not the use of TCP-
1
Socket is prohibited.
----------------------- 000
Description
Displayed
Not displayed
*Do not change this bit
when specifying settings
for this function.
Permitted
Prohibited
*Do not change these bits
when specifying settings
for this function.
11
Page Refer-
ence
----------
----------
----------
----------
11-101