Konica Minolta bizhub 362 User Manual page 77

Transmission
Why can't I select a program button?
?
% If a recipient has already been specified, for example, with a one-
touch dial button or by directly entering the fax number, a program
button cannot be selected. Select the program, and then specify
recipients using one-touch dial buttons or by directly entering the
fax number.
5
Check the settings, and then press
the Start key.
Scanning of the document begins,
and then the document is sent.
If a transmission time was specified,
the document is saved in the
memory and is sent at the specified
time.
Note
To stop the transmission, press the [Stop] key. For details, refer to
"Stopping the transmission" on page 3-39.
If software switch settings were specified to prevent broadcast
transmissions, a fax cannot be sent with a program button programmed
with multiple recipients. For details on the software switch settings, refer
to "Configuring Functions (Soft Switches)" on page 11-67.
bizhub 362/282/222
3
3-25