Utility mode
How to Set Soft Switches
1
After entering Administrator mode, press [Admin. 2].
2
Press [Software SW].
3
Touch [Mode Selection], and enter
the mode using the keypad.
4
Specify the mode using the [Bit
Selection] or [HEX Selection] key.
–
For bit selection:
Touch [Bit Selection], and use the
arrow keys to place the cursor on
the bit you want to change.
Use the keypad to enter a [0] or
[1], and touch [Enter].
–
For HEX specification:
Touch [HEX selection], use the
keypad and the letters [A] to[F] to
specify the bits, and touch
[Enter].
bizhub 362/282/222
11
11-69