Polling
5
Specify the fax number of the sender.
–
If a one-touch dial button is used, press the one-touch dial button
for the sender.
–
If the number is to be typed in directly, type in the fax number of the
sender.
6
Press [Next].
7
Specify the reception time.
–
Press [Hour] or [Minute], and then
use the keypad to type in the
desired time.
8
Press [Start].
A confirmation message appears, and then the reception begins at the
specified time.
Note
With polling reception, the recipient incurs the cost of the call.
If software switch settings were specified to limit dialing, a fax cannot be
sent by directly typing in the fax number. For details on the software
switch settings, refer to "Configuring Functions (Soft Switches)" on
page 11-67.
bizhub 362/282/222
9
9-7