Konica Minolta bizhub 362 User Manual page 189

Registering/Settings
7
Press [Transmission Setting].
8
Specify the functions to be
programmed. After all of the desired
functions have been specified, press
[Enter].
– If desired, press [Quality] or
[Menu 1], and then specify the
desired settings. For details on
the settings available on the
Quality screen, refer to "Setting
transmission conditions" on page 3-10. For details on the settings
available on the Menu 1 screen, refer to "Transmission
applications" on page 7-3.
9
Check the information to be
registered, and then press [Enter].
To change a setting, press the button
for the setting to be changed, and
then specify the new setting.
10
Press [Enter] in each screen until the standby screen (initial screen)
appears.
bizhub 362/282/222
10
10-25