Transmission After Searching By Destination - Konica Minolta bizhub 362 User Manual

3

Transmission after Searching by destination

From the Search screen, a programmed one-touch dial button can be
searched for.
1
Press [Fax/Scan] on the control panel to open the fax screen.
– The recipient must have been registered with a one-touch dial
button in advance. For details, refer to "Programming a one-touch
dial button" on page 10-5.
– If desired, press [Quality & Reduction] or [FAX Menu], and then
specify the desired settings. For details on the settings available on
the Quality & Reduction screen, refer to "Setting transmission
conditions" on page 3-10. For details on the settings available on
the FAX Menu screen, refer to "Transmission applications" on
page 7-3.
2
Press [Search].
– If "LDAP Search" (displayed by
touching [Network Settings] on
the Administrator Management 2
screen, then [Network Setting 1],
then [LDAP Setting]) is set to
"Yes", touching [Search] displays
a screen where "Search One-
Touch Keys" or "LDAP Search"
can be selected. If [Search One-Touch Keys] is touched, the Search
One-Touch Keys screen appears.
The Search One-Touch Keys screen appears.
3
Type in the name of the programmed
one-touch button, and then press
[Search].
The corresponding one-touch button
appears.
3-26
Transmission
bizhub 362/282/222