When You Cannot Generate Graphics In The Way You Want - Oce Eco Solvent CS9060 User Manual

Notes
•
If an error not included in any items of this section occurs, contact your local Océ representative.
Notes
•
If you want to receive product warranty, prepare the warranty certificate. If the warranty certificate is not
presented, the repair will not be covered by the warranty even if within the warranty period.
•
If you have signed a maintenance service contract, prepare that or a similar document.
6.1 WHEN YOU CANNOT GENERATE GRAPHICS IN THE WAY
YOU WANT
6.1.1 Perform Head cleaning
If the nozzle check result indicates that the checked points are blurred or missing, clean the print head.
Step 1 : Switch ON the printer and load the roll media.
Refer to: "Setting roll media"
Step 2 : Confirm that the printer functions normally.
Step 3 : Press the [Nozzle Check] key on the operation panel for at least 2 seconds.
•
Perform the nozzle check printing.
Step 4 : Check the print sample for blurred or missing points.
Step 5 : If the nozzle check result indicates that the checked points are blurred or missing, clean the
head.
For more information please refer to: "Head cleaning"
User's Guide Océ CS9060 printer
122 AP-75770 – Rev 1.1 -19/11/2007,
Chapter 6: Troubleshooting