Related show command:
IPv6 DMZ Setup Commands
net dmz ipv6 configure
This command enables, configures, or disables the IPv6 DMZ. After you have issued the net
dmz ipv6 configure command, you enter the net ipv6-config [dmz] mode, and then you
can configure one keyword and associated parameter or associated keyword at a time in the
order that you prefer.
Step 1
Format
Mode
Step 2
Format
Mode
Keyword
enable_dmz
ip_address
prefix_length
DHCPv6 server
dhcp_enable
dhcp_mode
domain_name
server_preference
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
show net dmz ipv4 setup
net dmz ipv6 configure
net
enable_dmz {Y | N}
ip_address <ipv6-address>
prefix_length <prefix length>
dhcp_enable {N | Y {dhcp_mode {Stateless | Stateful}}}
domain name <domain-name>
server_preference <number>
dns_server_option {useDnsProxy | useDnsFromISP | useEnteredDns
{primary_dns_server <ipv6-address>} [secondary_dns_server
<ipv6-address>]}
lease_time <seconds>
net-ipv6-config [dmz]
Associated Keyword to
Select or Parameter to Type
Y or N
ipv6-address
prefix length
Y or N
Stateless or Stateful
domain name
number
Net Mode Configuration Commands
Description
Enables or disables the DMZ.
The IPv6 address of the DMZ port.
The prefix length (integer) for the DMZ port.
Enables or disables DHCP server for the DMZ.
The DHCPv6 mode (Stateless or Stateful).
The server domain name (string) for the DHCP
server.
The preference number (integer) of the DHCP
server.
60