NETGEAR ProSafe FVS318N Cli Reference Manual page 120

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Keyword (might consist of two
separate words)
service_name
default_services
service_name
custom_services
action
schedule
LAN, WAN, and DMZ source and destination IP addresses
source_address_type
source_start_address
source_end_address
Associated Keyword to Select or
Parameter to Type
ANY, AIM, BGP, BOOTP_CLIENT,
BOOTP_SERVER, CU-SEEME:UDP,
CU-SEEME:TCP, DNS:UDP, DNS:TCP,
FINGER, FTP, HTTP, HTTPS,
ICMP-TYPE-3, ICMP-TYPE-4,
ICMP-TYPE-5, ICMP-TYPE-6,
ICMP-TYPE-7, ICMP-TYPE-8,
ICMP-TYPE-9, ICMP-TYPE-10,
ICMP-TYPE-11, ICMP-TYPE-13,
ICQ, IMAP2, IMAP3, IRC, NEWS, NFS,
NNTP, PING, POP3, PPTP, RCMD,
REAL-AUDIO, REXEC, RLOGIN,
RTELNET, RTSP:TCP, RTSP:UDP,
SFTP, SMTP, SNMP:TCP, SNMP:UDP,
SNMP-TRAPS:TCP,
SNMP-TRAPS:UDP, SQL-NET,
SSH:TCP, SSH:UDP, STRMWORKS,
TACACS, TELNET, TFTP, RIP, IKE,
SHTTPD, IPSEC-UDP-ENCAP, IDENT,
VDOLIVE, SSH, SIP-TCP, or SIP-UDP
custom service name
ALWAYS_BLOCK, ALWAYS_ALLOW,
BLOCK_BY_SCHEDULE_ELSE_ALLOW,
or
ALLOW_BY_SCHEDULE_ELSE_BLOCK
Schedule1, Schedule2, or
Schedule3
ANY, SINGLE_ADDRESS, or
ADDRESS_RANGE
ipv6-address
ipv6-address
Security Mode Configuration Commands
120
Description
The default service and protocol
to which the firewall rule applies.
The custom service that you have
configured with the security
services add command.
The type of action to be taken by
the rule.
The schedule, if any, that is
applicable to the rule.
The type of source address.
There are two options:
• The IPv6 address if the
source_address_type
keyword is set to
SINGLE_ADDRESS.
• The start IPv6 address if the
source_address_type
keyword is set to
ADDRESS_RANGE.
The end IPv6 address if the
source_address_type
keyword is set to
ADDRESS_RANGE.