NETGEAR ProSafe FVS318N Cli Reference Manual page 223

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Command example:
FVS318N> vpn sslvpn resource add
[sslvpn-resource-settings]> resource_name TopSecure
[sslvpn-resource-settings]> service_type PortForwarding
[sslvpn-resource-settings]> save
Related show command:
vpn sslvpn resource delete <row id>
This command deletes a resource by specifying its row ID.
Format
vpn sslvpn resource delete <row id>
Mode vpn
Related show command:
vpn sslvpn resource configure add <resource name>
This command configures a resource. (You first need to a add a resource with the
sslvpn resource add
configure add command to specify the resource that you want to configure, you enter the
[sslvpn-resource-settings] mode, and then you can configure one keyword and associated
parameter or associated keyword at a time in the order that you prefer.
Step 1 Format
vpn sslvpn resource configure add <resource name>
Mode vpn
Step 2 Format
object_type {IPAddress | IPNetwork}
For a single IP address:
ip_version {IPv4 {object_address <ipaddress>} | IPv6
start_port <port number>
end_port <port number>
show vpn sslvpn resource
show vpn sslvpn resource
command.) After you have issued the vpn sslvpn resource
{object_address6 <ipv6-address>}}
VPN Mode Configuration Commands
223
vpn