NETGEAR ProSafe FVS318N Cli Reference Manual page 103

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Keyword (might consist of two
separate words)
wan_destination_ip_address
wan_destination_ip_address_start
DMZ user addresses and WAN user addresses
dmz_users
dmz_user_start_ip
dmz_user_end_ip
wan_users
wan_user_start_ip
wan_user_end_ip
Logging
log
Associated Keyword to Select or
Parameter to Type
WAN or OTHERS
ipaddress
ANY, SINGLE_ADDRESS, or
ADDRESS_RANGE
ipaddress
ipaddress
ANY, SINGLE_ADDRESS, or
ADDRESS_RANGE
ipaddress
ipaddress
NEVER or ALWAYS
Security Mode Configuration Commands
103
Description
The type of destination WAN
address for an inbound rule:
• WAN. The default IP address of
the WAN (broadband) interface.
• OTHERS. Another public IP
address, which you need to
configure by issuing the
wan_destination_ip_address_start
keyword and specifying an IPv4
address.
The IP address if the
wan_destination_ip_address
keyword is set to OTHERS.
The type of DMZ address.
For an inbound rule, this option is
available only when the WAN mode
is Classical Routing.
There are two options:
• The IP address if the dmz_users
keyword is set to
SINGLE_ADDRESS.
• The start IP address if the
dmz_users keyword is set to
ADDRESS_RANGE.
The end IP address if the
dmz_users keyword is set to
ADDRESS_RANGE.
The type of WAN address.
There are two options:
• The IP address if the wan_users
keyword is set to
SINGLE_ADDRESS.
• The start IP address if the
wan_users keyword is set to
ADDRESS_RANGE.
The end IP address if the
wan_users keyword is set to
ADDRESS_RANGE.
Enables or disables logging.