Ipv6 Dmz Setup Commands - NETGEAR ProSafe SRX5308 Cli Reference Manual

net-config[dmz-ipv4]> ip_address 10.126.32.59
net-config[dmz-ipv4]> subnet_mask 2525.255.255.0
net-config[dmz-ipv4]> dhcp_mode None
net-config[dmz-ipv4]> dns_proxy_enable Y
net-config[dmz-ipv4]> save
Related show command:

IPv6 DMZ Setup Commands

net dmz ipv6 configure
This command enables, configures, or disables the IPv6 DMZ. After you have issued the net
dmz ipv6 configure command, you enter the net-config [dmz-ipv6] mode, and then you
can configure one keyword and associated parameter or associated keyword at a time in the
order that you prefer.
Step 1 Format
Mode
Step 2 Format
Mode
Keyword
enable_dmz
ip_address
prefix_length
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
show net dmz ipv4 setup
net dmz ipv6 configure
net
enable_dmz {Y | N}
ip_address <ipv6-address>
prefix_length <prefix length>
dhcp_enable {N | Y {dhcp_mode {Stateless | Stateful}}}
domain name <domain-name>
server_preference <number>
dns_server_option {useDnsProxy | useDnsFromISP | useEnteredDns
{primary_dns_server <ipv6-address>} [secondary_dns_server
<ipv6-address>]}
lease_time <seconds>
net-config [dmz-ipv6]
Associated Keyword to
Select or Parameter to Type
Y or N
ipv6-address
prefix length
Net Mode Configuration Commands
Description
Enables or disables the DMZ.
The IPv6 address of the DMZ port.
The prefix length (integer) for the DMZ port.
76