Chapter 9 Show Commands; Network Settings (Net Mode) Show Commands; Wan (Ipv4 And Ipv6) Show Commands - NETGEAR ProSafe FVS318N Cli Reference Manual

Show Commands
9.
This chapter explains the show commands and associated parameters for the five configuration
command modes. The chapter includes the following sections:
•

Network Settings (Net Mode) Show Commands

• Security Settings (Security Mode) Show Commands
• Administrative and Monitoring Settings (System Mode) Show Commands
• Wireless Settings (Dot11 Mode) Show Commands
• VPN Settings (VPN Mode) Show Commands
Network Settings (Net Mode) Show Commands
This section contains the following subsections:
•

WAN (IPv4 and IPv6) Show Commands

• IPv6 Mode and IPv6 Tunnel Show Commands
• LAN DHCP Show Commands
• Dynamic DNS Show Commands
• IPv4 LAN Show Commands
• IPv6 LAN Show Commands
• DMZ Show Commands
• Routing Show Commands
• Network Statistics Show Commands
WAN (IPv4 and IPv6) Show Commands
show net wan_settings wanmode
This command displays the IPv4 WAN routing mode:
Routing Mode between WAN and LAN
__________________________________
NAT is Enabled
245
9