NETGEAR ProSafe FVS318N Cli Reference Manual page 52

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
net-config[lan-ipv6]> dhcp domain name netgear.com
net-config[lan-ipv6]> dhcp server_preference 236
net-config[lan-ipv6]> dhcp dns_type useDnsProxy
net-config[lan-ipv6]> dhcp rebind_time 43200
net-config[lan-ipv6]> save
Related show command:
net lan ipv6 pool configure
This command configures a new or existing IPv6 DHCP address pool. After you have issued
the net lan ipv6 pool configure command, you enter the net-config [lan-ipv6-pool]
mode, and then you can configure the IPv6 start and end addresses and the IPv6 prefix
length for the IPv6 pool in the order that you prefer.
Step 1 Format
net lan ipv6 pool configure
Mode net
Step 2 Format
start_address <ipv6-address>
end_address <ipv6-address>
prefix_value <prefix length>
Mode net-config [lan-ipv6-pool]
Command example:
FVS318N> net lan ipv6 pool configure
net-config[lan-ipv6-pool]> start_address 2001::1025
net-config[lan-ipv6-pool]> end_address 2001::1030
net-config[lan-ipv6-pool]> prefix_value 56
net-config[lan-ipv6-pool]> save
Related show command:
net lan ipv6 pool delete <start ipv6-address>
This command deletes an IPv6 DHCP address pool by deleting its start address.
Format
net lan ipv6 pool delete <start ipv6-address>
Mode net
Related show command:
show net lan ipv6 setup
show net lan ipv6 setup
show net lan ipv6 setup
Net Mode Configuration Commands
52