Dynamic Dns Commands - NETGEAR ProSafe FVS318N Cli Reference Manual

Related show commands:
net ipv6_tunnel six_to_four configure
This command enables or disables automatic tunneling, which allows traffic from an IPv6
LAN to be tunneled through an IPv4 WAN to reach an IPv6 network. After you have issued
the net ipv6_tunnel six_to_four configure command, you enter the
net-config [six-to-four-tunnel] mode, and then you can configure automatic tunneling.
Step 1 Format
Mode
Step 2 Format
Mode
Related show commands:

Dynamic DNS Commands

net ddns configure
This command enables, configures, or disables Dynamic DNS (DDNS) service. After you
have issued the net ddns configure command, you enter the net-config [ddns] mode,
and then you can configure one keyword and associated parameter or associated keyword at
a time in the order that you prefer.
Step 1 Format
Mode
Step 2 Format
Mode
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
show net ipv6_tunnel setup
net ipv6_tunnel six_to_four configure
net
automatic_tunneling_enable {Y | N}
net-config [six-to-four-tunnel]
show net ipv6_tunnel setup
net ddns configure
net
enable {Disable | DynDNS | TZO | DNS_Oray | 3322_DDNS}
hostname <host name>
username <user name>
password <password>
wild_flag_enable {Y | N}
time_update_enable {Y | N}
net-config [ddns]
Net Mode Configuration Commands
and show net ipv6_tunnel status
and show net ipv6_tunnel status
40