NETGEAR ProSafe FVS318N Cli Reference Manual page 75

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
security services edit <row id>
This command configures an existing firewall custom service. After you have issued the
security services edit command to specify the row to be edited, you enter the
security-config [custom-service] mode, and then you can edit the service.
Step 1 Format
security services edit <row id>
Mode security
Step 2 Format
name <service name>
protocol {TCP {start_port <number>} {finish_port <number>} |
qos_priority {Normal-Service | Minimize-Cost |
Mode security-config [custom-service]
Keyword Associated Keyword to
Select or Parameter to Type
name service name
TCP, UDP, ICMP, or ICMPv6
protocol
start_port number
finish_port number
icmp_type number
qos_priority Normal-Service,
Minimize-Cost,
Maximize-Reliability,
Maximize-Throughput, or
Minimize-Delay
Related show command:
security services delete <row id>
This command deletes a custom security service by deleting its row ID.
Format
security services delete <row id>
Mode security
UDP {start_port <number>} {finish_port <number>} |
ICMP {icmp_type <number> | ICMPv6 {icmp_type <number>}}
Maximize-Reliability | Maximize-Throughput | Minimize-Delay}
Description
Name (string) of the service.
The protocol type that applies to the service.
For TCP and UPD, the start port number (integer) of the
range used by the destination user. Valid numbers are from
0 to 65535.
For TCP and UPD, the end port number (integer) of the
range used by the destination user. Valid numbers are from
0 to 65535.
The port number (integer) used by the destination user.
The type of QoS that applies to the service. The keywords
are self-explanatory.
show security services setup
Security Mode Configuration Commands
75