Time Zone Command; System Time Configure - NETGEAR ProSafe FVS318N Cli Reference Manual

Time Zone Command

system time configure

This command configures the system time, date, and NTP servers. After you have issued the
system time configure command, you enter the system-config [time] mode, and then
you can configure one keyword and associated parameter or associated keyword at a time in
the order that you prefer.
Step 1 Format
Mode
Step 2 Format
Mode
Keyword
timezone
auto_daylight
resolve_ipv6_address
use_default_servers
configure_ntp_servers Y or N
ntp_server1
ntp_server2
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
system time configure
system
timezone <timezone>
auto_daylight {Y | N}
resolve_ipv6_address {Y | N}
use_default_servers {Y | N}
configure_ntp_servers {Y | N {ntp_server1 {<ipaddress> |
<domain name>}} {ntp_server2 {<ipaddress> | <domain name>}}}
system-config [time]
Associated Keyword to
Select or Parameter to Type
timezone keyword
Y or N
Y or N
Y or N
ipaddress or domain name The IP address of domain name of the first
ipaddress or domain name The IP address of domain name of the second
System Mode Configuration Commands
Description
For a list of time zones that you can enter,
see Table 12.
Specifies whether or not the wireless VPN
firewall automatically adjusts for daylight savings
time.
Specifies whether or not the wireless VPN
firewall automatically resolves a domain name for
an NTP server to an IPv6 address:
• Y. A domain name is resolved to an IPv6
address.
• N. A domain name is resolved to an IPv4
address.
Enables or disables the use of default NTP
servers.
Enables or disables the use of custom NTP
servers. If you enable the use of custom NTP
servers, you need to specify the server IP
addresses or domain names with the
ntp_server1 and ntp_server2 keywords.
custom NTP server.
custom NTP server.
151