NETGEAR ProSafe FVS318N Cli Reference Manual page 237

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Keyword
Primary RADIUS server
enable
radius-server
secret
nas_identifier
Backup RADIUS server
backup_server_enable
backup_radius_server
backup_server_secret
backup_server_nas_identifier identifier
Connection configuration
timeout
retries
Command example:
FVS318N> vpn radius configure
radius-config> enable Y
radius-config> radius-server 192.168.1.2
radius-config> secret Hlo0ole1H12aaq43
radius-config> nas_identifier FVS318N-Bld3
radius-config> backup_server_enable Y
radius-config> backup_radius-server 192.168.1.3
radius-config> backup_server_secret Hduo0oplH54bqX91
radius-config> backup_server_nas_identifier FVS318N-Bld3
radius-config> timeout 30
radius-config> retries 4
radius-config> save
Related show command:
Associated Keyword to
Select or Parameter to Type
Y or N
ipaddress
secret
identifier
Y or N
ipaddress
secret
seconds
number
show vpn radius [ipaddress]
VPN Mode Configuration Commands
237
Description
Specifies whether or not the primary
RADIUS server is enabled.
The IPv4 address of the primary
RADIUS server.
The secret phrase (alphanumeric string)
for the primary RADIUS server.
The NAS ID for the primary RADIUS
server.
Specifies whether or not the backup
RADIUS server is enabled.
The IPv4 address of the backup
RADIUS server.
The secret phrase (alphanumeric string)
for the backup RADIUS server.
The NAS ID for the backup RADIUS
server.
The connection time-out in seconds for
the RADIUS server.
The number of connection retry
attempts for the RADIUS server.