Ssl Vpn Policy Commands; Vpn Sslvpn Policy Add - NETGEAR ProSafe FVS318N Cli Reference Manual

Keyword
mask_length
start_port
end_port
Command example:
FVS318N> vpn sslvpn resource configure add TopSecure
[sslvpn-resource-settings]> object_type IPNetwork
[sslvpn-resource-settings]> ip_version IPv4
[sslvpn-resource-settings]> object_address 192.168.30.56
[sslvpn-resource-settings]> mask_length 24
[sslvpn-resource-settings]> start_port 3391
[sslvpn-resource-settings]> end_port 3393
[sslvpn-resource-settings]> save
Related show command:

SSL VPN Policy Commands

vpn sslvpn policy add

This command configures a new SSL VPN policy. After you have issued the vpn sslvpn
policy add command, you enter the [sslvpn-policy-settings] mode, and then you can
configure one keyword and associated parameter or associated keyword at a time in the
order that you prefer.
Step 1 Format
Mode
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Associated Keyword to
Select or Parameter to Type
subnet mask length or
prefix length
number
number
show vpn sslvpn resource-object <resource name>
vpn sslvpn policy add
vpn
VPN Mode Configuration Commands
Description
The nature of this keyword and parameter depend on
the setting of the ip_version and object_type
keywords:
• If the ip_version keyword is set to IPv4 and the
object_type keyword is set to IPNetwork, the
subnet mask length of the IPv4 network.
• If the ip_version keyword is set to IPv6 and the
object_type keyword is set to IPNetwork, the
prefix length of the IPv6 network.
The start port number for the port range that applies to
the object.
The end port number for the port range that applies to
the object.
225