NETGEAR ProSafe FVS318N Cli Reference Manual page 33

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Keyword
dhcpc get_dns_from_isp
dhcpc primary_dns
dhcpc secondary_dns
PPPoE (These keywords consist of two separate words)
pppoe username
pppoe password
pppoe AccountName
pppoe DomainName
pppoe connectivity_type
pppoe idle_time
pppoe connection_reset
pppoe reset_hour
pppoe reset_min
Associated Keyword to
Select or Parameter to Type
Y or N
ipaddress
ipaddress
user name
password
account name
domain name
keepalive or
idletimeout
minutes
Y or N
hour
minutes
Net Mode Configuration Commands
33
Description
Specifies whether or not the IP address is
dynamically received from the ISP. If you
select N, you need to issue the dhcpc
primary_dns keyword and enter the IP
address of the primary DNS server. For a
secondary DNS server, issue the dhcpc
secondary_dns keyword, and enter the IP
address.
The IP address of the primary DNS server if
your IP address is not dynamically received
from the ISP.
The IP address of the optional secondary
DNS server if your IP address is not
dynamically received from the ISP.
The user name (alphanumeric string) to log
in to the PPPoE service, if required.
The password (alphanumeric string) to log in
to the PPPoE service, if required.
The PPPoE account name (alphanumeric
string).
The PPPoE domain name (alphanumeric
string).
The type of PPPoE connection. If you select
idletimeout, you need to issue the
idle_time keyword and enter the idle
time-out in minutes.
The idle time-out period in minutes, from 5 to
999 minutes.
Specifies whether or not the PPPoE
connection is automatically reset. If it is
reset, you need to issue the reset_hour
and reset_min keywords and enter the
hour and minutes after which the connection
is reset. You also need to issue the
delay_in_reset keyword and enter the
number of seconds of delay.
The hour at which the PPPoE connection is
reset.
The minutes at which the PPPoE connection
is reset.