NETGEAR ProSafe FVS318N Cli Reference Manual page 96

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Keyword (might consist of two
separate words)
Service name, action, and schedule
service_name
default_services
service_name
custom_services
action
schedule
DMZ user addresses and WAN user addresses
dmz_users
dmz_user_start_ip
dmz_user_end_ip
wan_users
Associated Keyword to Select or
Parameter to Type
ANY, AIM, BGP, BOOTP_CLIENT,
BOOTP_SERVER, CU-SEEME:UDP,
CU-SEEME:TCP, DNS:UDP, DNS:TCP,
FINGER, FTP, HTTP, HTTPS,
ICMP-TYPE-3, ICMP-TYPE-4,
ICMP-TYPE-5, ICMP-TYPE-6,
ICMP-TYPE-7, ICMP-TYPE-8,
ICMP-TYPE-9, ICMP-TYPE-10,
ICMP-TYPE-11, ICMP-TYPE-13,
ICQ, IMAP2, IMAP3, IRC, NEWS, NFS,
NNTP, PING, POP3, PPTP, RCMD,
REAL-AUDIO, REXEC, RLOGIN,
RTELNET, RTSP:TCP, RTSP:UDP,
SFTP, SMTP, SNMP:TCP, SNMP:UDP,
SNMP-TRAPS:TCP,
SNMP-TRAPS:UDP, SQL-NET,
SSH:TCP, SSH:UDP, STRMWORKS,
TACACS, TELNET, TFTP, RIP, IKE,
SHTTPD, IPSEC-UDP-ENCAP, IDENT,
VDOLIVE, SSH, SIP-TCP, or SIP-UDP
custom service name
ALWAYS_BLOCK, ALWAYS_ALLOW,
BLOCK_BY_SCHEDULE_ELSE_ALLOW,
or
ALLOW_BY_SCHEDULE_ELSE_BLOCK
Schedule1, Schedule2, or
Schedule3
ANY, SINGLE_ADDRESS, or
ADDRESS_RANGE
ipaddress
ipaddress
ANY, SINGLE_ADDRESS, or
ADDRESS_RANGE
Security Mode Configuration Commands
96
Description
The default service and protocol to
which the firewall rule applies.
The custom service that you have
configured with the security
services add command.
The type of action to be enforced
by the rule.
The schedule, if any, that is
applicable to the rule.
The type of DMZ address.
There are two options:
• The IP address if the dmz_users
keyword is set to
SINGLE_ADDRESS.
• The start IP address if the
dan_users keyword is set to
ADDRESS_RANGE.
The end IP address if the
dan_users keyword is set to
ADDRESS_RANGE.
The type of WAN address.