NETGEAR ProSafe FVS318N Cli Reference Manual page 55

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Keyword (might consist
of two separate words)
interval
flags
preference
mtu
life_time
Command example:
FVS318N> net radvd configure lan
net-config[radvd]> enable Y
net-config[radvd]> mode Unsolicited-Multicast
net-config[radvd]> interval 60
net-config[radvd]> flags Managed
net-config[radvd]> preference Medium
net-config[radvd]> mtu 1496
net-config[radvd]> life_time 7200
net-config[radvd]> save
Related show command:
net radvd pool lan add
This command configures the IPv6 RADVD pool of advertisement prefixes for the LAN. After
you have issued the net radvd pool lan add command, you enter the
net-config [radvd-pool-lan] mode, and then you can configure one keyword and associated
parameter or associated keyword at a time in the order that you prefer.
Step 1 Format
net radvd pool lan add
Mode net
Associated Keyword to
Select or Parameter to Type
seconds
Managed or Other
Low, Medium, or High
number
seconds
show net radvd lan setup
Net Mode Configuration Commands
55
Description
The interval in seconds (integer) between
unsolicited multicast RAs. Enter a period from 10
to 1800 seconds. The default is 30 seconds.
Sets the flag:
• Managed. Specifies that the DHCPv6 stateful
protocol is used for autoconfiguration of the
address.
• Other. Specifies that the DHCPv6 stateful
protocol is used for autoconfiguration of other
(that is, nonaddress) information.
The wireless VPN firewall's preference in relation
to other hosts and routers in the LAN.
The MTU size (integer) that is used in the RAs to
ensure that all nodes in the network use the same
MTU size. The default is 1500 seconds.
The advertisement lifetime in seconds (integer) of
the route. The default is 3600 seconds.