Ipsec Vpn Mode Config Commands - NETGEAR ProSafe FVS318N Cli Reference Manual

vpn ipsec vpnpolicy drop <vpn policy name>
This command terminates an active VPN connection by specifying the name of the VPN
policy.
Format
vpn ipsec vpnpolicy drop <vpn policy name>
Mode vpn
Related show command:

IPSec VPN Mode Config Commands

vpn ipsec mode_config configure <record name>
This command configures a Mode Config record. After you have issued the vpn ipsec
mode_config configure command to specify a record name, you enter the
vpn-config [modeConfig] mode, and then you can configure one keyword and associated
parameter or associated keyword or associated keyword at a time in the order that you
prefer.
Step 1 Format
Mode
Step 2 Format
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
show vpn ipsec vpnpolicy setup
vpn ipsec mode_config configure <record name>
vpn
first_pool_start_ip <ipaddress>
first_pool_end_ip <ipaddress>
second_pool_start_ip <ipaddress>
second_pool_end_ip <ipaddress>
third_pool_start_ip <ipaddress>
third_pool_end_ip <ipaddress>
wins_server_primary_ip <ipaddress>
wins_server_secondary_ip <ipaddress>
dns_server_primary_ip <ipaddress>
dns_server_secondary_ip <ipaddress>
VPN Mode Configuration Commands
and show vpn ipsec vpnpolicy status
198