NETGEAR ProSafe FVS318N Cli Reference Manual page 71

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Step 2 Format
active_flag {Y | N}
destination_address <ipv6-address>
prefix <prefix length>
gateway_address <ipv6-address>
interface {Dedicated-WAN | LAN | Sit0-WAN1}
metric <number>
Mode net-config [static-routing-ipv6]
Keyword
active_flag
destination_address ipv6-address
prefix
interface
gateway_address
metric
Command example:
FVS318N> net routing static ipv6 configure SFO2
net-config[static-routing-ipv6]> active_flag Y
net-config[static-routing-ipv6]> destination_address 2002:201b:24e2::1001
net-config[static-routing-ipv6]> prefix 64
net-config[static-routing-ipv6]> interface Dedicated-WAN
net-config[static-routing-ipv6]> gateway_address FE80::2001:5efe:ab23
net-config[static-routing-ipv6]> metric 2
net-config[static-routing-ipv6]> save
Related show command:
Associated Keyword to
Select or Parameter to Type
Y or N
prefix length
Dedicated-WAN, LAN, or
Sit0-WAN1
ipv6-address
number
show net routing static ipv6 setup
Net Mode Configuration Commands
71
Description
Specifies whether or not the route is an active route.
The destination IP address.
The IPv6 prefix length (integer). This is a decimal
value that indicates the number of contiguous,
higher-order bits of the address that make up the
network portion of the address.
The physical or virtual network interface through
which the route is accessible:
• Dedicated-WAN. The dedicated WAN interface.
• LAN. A LAN interface.
• Sit0-WAN1. The 6to4-WAN interface.
The gateway IP address.
The metric (integer) for this route. The number can
be from 2 to 15.