Administrative And Monitoring Settings (System Mode) Show Commands; Remote Management Show Command - NETGEAR ProSafe FVS318N Cli Reference Manual

Administrative and Monitoring Settings (System Mode)
Show Commands
This section contains the following subsections:
•

Remote Management Show Command

• SNMP Show Commands
• Time Show Command
• Firmware Version Show Command
• Status Show Command
• Traffic Meter Show Command
• Logging Configuration Show Commands
• Logs Show Commands
Note: The VPN logs and RADIUS logs are part of the VPN Mode show
commands (see
page 280).
Remote Management Show Command
show system remote_management setup
This command displays the configuration of remote management for Telnet and HTTPS
access:
Remote Mgmt Configuration for telnet
____________________________________
IPv4 access granted to everyone
IPv6 access granted to a range of IPs from : FEC0::3001 to FEC0::3100
port being used : 23
Remote Mgmt Configuration for https
___________________________________
IPv4 access granted to everyone
IPv6 access granted to everyone
port being used : 445
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
VPN Settings (VPN Mode) Show Commands
Show Commands
267
on