NETGEAR ProSafe FVS318N Cli Reference Manual page 219

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Step 2 Format
enable_full_tunnel {Y | N}
dns_suffix <suffix>
primary_dns <ipaddress>
secondary_dns <ipaddress>
begin_client_address <ipaddress>
end_client_address <ipaddress>
Mode [sslvpn-client-ipv4-settings]
Keyword
enable_full_tunnel
dns_suffix
primary_dns
secondary_dns
begin_client_address
end_client_address
Command example:
FVS318N> vpn sslvpn client ipv4
[sslvpn-client-ipv4-settings]> enable_full_tunnel N
[sslvpn-client-ipv4-settings]> primary_dns 192.168.10.5
[sslvpn-client-ipv4-settings]> secondary_dns 192.168.10.6
[sslvpn-client-ipv4-settings]> begin_client_address 192.168.200.50
[sslvpn-client-ipv4-settings]> end_client_address 192.168.200.99
[sslvpn-client-ipv4-settings]> save
Related show command:
Associated Keyword to
Select or Parameter to Type
Y or N
suffix
ipaddress
ipaddress
ipaddress
ipaddress
show vpn sslvpn client
VPN Mode Configuration Commands
219
Description
Enables or disables full-tunnel support:
• Yes. Enables full-tunnel support.
• No. Disables full-tunnel support and enables
split-tunnel support. If you enable split-tunnel
support and you assign an entirely different
subnet to the VPN tunnel clients from the
subnet that is used by the local network, you
need to add a client route to ensure that a VPN
tunnel client connects to the local network over
the VPN tunnel (see the
command).
The DNS suffix to be appended to incomplete
DNS search strings. This setting is optional.
The IP address of the primary DNS server. This
setting is optional.
Note: If you do not assign a DNS server, the
DNS settings remain unchanged in the VPN
client after a VPN tunnel has been established.
The IP address of the secondary DNS server.
This setting is optional.
The start IP address of the IPv4 client range. The
default address is 192.168.251.1.
The end IP address of the IPv4 client range. The
default address is 192.168.251.254.
vpn sslvpn route add