NETGEAR ProSafe FVS318N Cli Reference Manual page 64

Wireless-n 8-port gigabit vpn firewall
Hide thumbs Also See for ProSafe FVS318N:
Table of Contents

Advertisement

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Keyword
Associated Keyword to
Select or Parameter to Type
6To4 or
prefix_type
Global-Local-ISATAP
sla_id
ID number
prefix_address
ipv6-address
prefix_length
prefix length
prefix_life_time
seconds
Command example:
FVS318N> net radvd pool dmz add
net-config[radvd-pool-dmz]> prefix_type Global-Local-ISATAP
net-config[radvd-pool-dmz]> prefix_address 2002:3a2b
net-config[radvd-pool-dmz]> prefix_length 64
net-config[radvd-pool-dmz]> prefix_life_time 3600
net-config[radvd-pool-dmz]> save
Related show command:
net radvd pool dmz edit <row id>
This command configures an existing IPv6 RADVD address pool for the DMZ. After you have
issued the net radvd pool dmz edit command to specify the row to be edited, you
enter the net-config [radvd-pool-dmz] mode, and then you can configure one keyword and
associated parameter or associated keyword at a time in the order that you prefer.
Step 1
Format
net radvd pool dmz edit <row id>
Mode
net
Description
The prefix type that specifies the type of
communication between the interfaces:
• 6To4. The prefix is for a 6to4 address. You need to
• Global-Local-ISATAP. The prefix is for a global,
The site-level aggregation identifier (SLA ID) (integer)
in the 6to4 address prefix is the ID of the interface from
which the advertisements are sent.
The IPv6 address for a global, local, or ISATAP prefix.
The IPv6 prefix length (integer) for a global, local, or
ISATAP prefix. This is a decimal value that indicates
the number of contiguous, higher-order bits of the
address that make up the network portion of the
address.
The period in seconds (integer) during which the
requesting router is allowed to use the prefix.
show net radvd dmz setup
Net Mode Configuration Commands
64
issue the sla_id keyword and specify the interface
ID.
local, or ISATAP address. This needs to be a global
prefix, not the site-local or link-local prefix. You need
to issue the prefix_address and
prefix_length keywords and associated
parameters.

Advertisement

Table of Contents
loading

Table of Contents