NETGEAR ProSafe FVS318N Cli Reference Manual page 23

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Table 8. Security mode configuration commands (continued)
Submode Command Name
security firewall ipv4 edit_rule dmz_wan inbound <row id>
security firewall ipv4 edit_rule dmz_wan outbound <row id>
security firewall ipv4 edit_rule lan_dmz inbound <row id>
security firewall ipv4 edit_rule lan_dmz outbound <row id>
security firewall ipv4 edit_rule lan_wan inbound <row id>
security firewall ipv4 edit_rule lan_wan outbound <row id>
firewall
(continued)
security firewall ipv4 enable <row id>
security firewall ipv6 configure
security firewall ipv6 default_outbound_policy {Allow |
Block}
security firewall ipv6 delete <row id>
security firewall ipv6 disable <row id>
security firewall ipv6 edit <row id>
security firewall ipv6 enable <row id>
security firewall session_limit configure
security firewall session_settings configure
porttriggering_rules security porttriggering_rules add
security porttriggering_rules delete <row id>
security porttriggering_rules edit <row id>
Overview of the Configuration Commands
23
Purpose
Configure an existing IPv4
DMZ WAN inbound firewall
rule.
Configure an existing IPv4
DMZ WAN outbound firewall
rule.
Configure an existing IPv4
LAN DMZ inbound firewall
rule.
Configure an existing IPv4
LAN DMZ outbound firewall
rule.
Configure an existing IPv4
LAN WAN inbound firewall
rule.
Configure an existing IPv4
LAN WAN outbound firewall
rule.
Enable an IPv4 firewall rule.
Configure a new IPv6 firewall
rule.
Configure the default
outbound policy for IPv6
traffic.
Delete an IPv6 firewall rule.
Disable an IPv6 firewall rule.
Configure an existing IPv6
firewall rule.
Enable an IPv6 firewall rule.
Configure global session
limits.
Configure global session
time-outs.
Configure a new port
triggering rule.
Delete a port triggering rule.
Configure an existing port
triggering rule.