System Snmp Sys Configure - NETGEAR ProSafe FVS318N Cli Reference Manual

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
system snmp trap delete <ipaddress>
This command deletes an SNMP agent by deleting its IP address.
Format
system snmp trap delete <ipaddress>
Mode system
Related show command:

system snmp sys configure

This command configures the SNMP system information. After you have issued the system
snmp sys configure command, you enter the system-config [snmp-system] mode, and
then you can configure one keyword and associated parameter or associated keyword at a
time in the order that you prefer.
Step 1 Format
system snmp sys configure
Mode system
Step 2 Format
sys-contact <contact name>
sys-location <location name>
sys-name <system name>
Mode system-config [snmp-system]
Keyword Associated
Parameter to Type
sys-contact contact name
sys-location location name
sys-name system name
Command example:
FVS318N> system snmp sys configure
system-config[snmp-system]> sys-contact AdminFVS@netgear.com
system-config[snmp-system]> sys-location San Jose
system-config[snmp-system]> sys-name FVS318N-Bld3
system-config[snmp-system]> save
Related show command:
show system snmp trap [agent ipaddress]
Description
The system contact name (alphanumeric string).
The system location name (alphanumeric string).
The system name (alphanumeric string).
show system snmp sys
System Mode Configuration Commands
150