NETGEAR ProSafe FVS318N Cli Reference Manual page 124

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
security firewall attack_checks jumboframe setup
This command enables or disables jumbo frames for IPv4 traffic. After you have issued the
security firewall attack_checks jumboframe setup command, you enter the
security-advanced-config [jumbo-frame] mode, and then you can enable or disable jumbo
frames.
Step 1 Format
security firewall attack_checks jumboframe setup
Mode security
Step 2 Format
enable_jumboframe {Y | N}
Mode security-advanced-config [jumbo-frame]
Related show command:
security firewall attack_checks vpn_passthrough configure
This command configures VPN pass-through for IPv4 traffic. After you have issued the
security firewall attack_checks vpn_passthrough configure command, you
enter the security-config [vpn-passthrough] mode, and then you can configure one keyword
and associated parameter or associated keyword at a time in the order that you prefer.
Step 1 Format
security firewall attack_checks vpn_passthrough configure
Mode security
Step 2 Format
ipsec_enable {Y | N}
l2tp_enable {Y | N}
pptp_enable {Y | N}
Mode security-config [vpn-passthrough]
Keyword Associated Keyword
to Select
Y or N
ipsec_enable
Y or N
l2tp_enable
Y or N
pptp_enable
Command example:
FVS318N> security firewall attack_checks vpn_passthrough configure
security-config[vpn-passthrough]> ipsec_enable Y
security-config[vpn-passthrough]> l2tp_enable Y
security-config[vpn-passthrough]> pptp_enable N
security-config[vpn-passthrough]> save
show security firewall attack_checks jumboframe
Description
Enables or disables IPSec pass-through.
Enables or disables L2TP pass-through.
Enables or disables PPTP pass-through.
Security Mode Configuration Commands
124