NETGEAR ProSafe FVS318N Cli Reference Manual page 86

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Keyword (might consist of two
separate words)
translate_to_port_number
enable
translate_to_port_number
port
wan_destination_ip_address
wan_destination_ip_address_start
wan_destination_ip_address_end
LAN user addresses or LAN group and WAN user addresses
lan_user address_wise
lan_user_start_ip
Associated Keyword to Select or
Parameter to Type
Y or N
number
WAN, OTHERS, or RANGE
ipaddress
ipaddress
ANY, SINGLE_ADDRESS, or
ADDRESS_RANGE
ipaddress
Security Mode Configuration Commands
86
Description
Enables or disables port
forwarding.
The port number (integer) if port
forwarding is enabled. Valid
numbers are 0 through 65535.
The type of destination WAN
address for an inbound rule:
• WAN. The default IP address of
the WAN (broadband) interface.
• OTHERS. Another public IP
address, which you need to
configure by issuing the
wan_destination_ip_address_start
keyword and specifying an IPv4
address.
• RANGE. A range of public IP
addresses, which you need to
configure by issuing the
wan_destination_ip_address_start
and
wan_destination_ip_address_end
keywords and specifying IPv4
addresses.
There are two options:
• The IP address if the
wan_destination_ip_address
keyword is set to OTHERS.
• The start IP address if the
wan_destination_ip_address
keyword is set to RANGE.
The end IP address if the
wan_destination_ip_address
keyword is set to RANGE.
The type of LAN address.
For an inbound rule, this option is
available only when the WAN mode
is Classical Routing.
There are two options:
• The IP address if the lan_user
address_wise keywords are
set to SINGLE_ADDRESS.
• The start IP address if the
lan_user address_wise
keywords are set to
ADDRESS_RANGE.