NETGEAR ProSafe FVS318N Cli Reference Manual page 123

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Keyword
WAN security checks
respond_to_ping_on_internet_ports Y or N
enable_stealth_mode
block_tcp_flood
LAN security checks
block_udp_flood
disable_ping_reply_on_lan
Command example:
FVS318N> security firewall attack_checks configure ipv4
security-config[attack-checks-ipv4]> respond_to_ping_on_internet_ports N
security-config[attack-checks-ipv4]> enable_stealth_mode Y
security-config[attack-checks-ipv4]> block_tcp_flood Y
security-config[attack-checks-ipv4]> block_udp_flood N
security-config[attack-checks-ipv4]> disable_ping_reply_on_lan Y
security-config[attack-checks-ipv4]> save
Related show command:
security firewall attack_checks igmp setup
This command enables or disables multicast pass-through by enabling or disabling the IGMP
proxy for IPv4 traffic. After you have issued the security firewall attack_checks
igmp setup command, you enter the security-advanced-config [igmp] mode, and then you
can enable or disable the IGMP proxy.
Step 1 Format
security firewall attack_checks igmp setup
Mode security
Step 2 Format
enable_igmp_proxy {Y | N}
Mode security-advanced-config [igmp]
Related show command:
Associated Keyword
to Select
Y or N
Y or N
Y or N
Y or N
show security firewall attack_checks setup ipv4
show security firewall attack_checks igmp
Security Mode Configuration Commands
123
Description
Enables or disables the response to a
ping from the WAN port.
Enables or disables stealth mode.
Blocks or allows TCP floods on the WAN
port.
Blocks or allows UDP floods on LAN
ports.
Enables or disables ping replies from
LAN ports.