NETGEAR ProSafe FVS318N Cli Reference Manual page 74

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Step 1 Format
security services add
Mode security
Step 2 Format
name <service name>
protocol {TCP {start_port <number>} {finish_port <number>} |
qos_priority {Normal-Service | Minimize-Cost |
Mode security-config [custom-service]
Keyword Associated Keyword to
Select or Parameter to Type
name service name
TCP, UDP, ICMP, or ICMPv6
protocol
start_port number
finish_port number
icmp_type number
qos_priority Normal-Service,
Minimize-Cost,
Maximize-Reliability,
Maximize-Throughput, or
Minimize-Delay
Command example:
FVS318N> security services add
security-config[custom-service]> name Traceroute
security-config[custom-service]> protocol ICMP
security-config[custom-service]> icmp_type 20
security-config[custom-service]> qos_priority Minimize-Delay
security-config[custom-service]> save
Related show command:
UDP {start_port <number>} {finish_port <number>} |
ICMP {icmp_type <number> | ICMPv6 {icmp_type <number>}}
Maximize-Reliability | Maximize-Throughput | Minimize-Delay}
Description
Name (string) of the service.
The protocol type that applies to the service.
For TCP and UPD, the start port number (integer) of the
range used by the destination user. Valid numbers are from 0
to 65535.
For TCP and UPD, the end port number (integer) of the
range used by the destination user. Valid numbers are from 0
to 65535.
The port number (integer) used by the destination user.
The type of QoS that applies to the service. The keywords
are self-explanatory.
show security services setup
Security Mode Configuration Commands
74