NETGEAR ProSafe FVS318N Cli Reference Manual page 32

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Keyword
isp_connection_type
isp_login_required
Static
static ip_address
static subnet_mask
static gateway_address
static primary_dns
static secondary_dns
DHCPC (These keywords consist of two separate words)
dhcpc account_name
dhcpc domain_name
dhcpc client_identifier
dhcpc vendor_identifier
Associated Keyword to
Select or Parameter to Type
STATIC, DHCPC, PPPoE, or
PPTP
Yes
Y or N
ipaddress
subnet mask
ipaddress
ipaddress
ipaddress
account name
domain name
Y or N
Y or N
Net Mode Configuration Commands
32
Description
Specifies the type of ISP connection. You
can specify only one type of connection:
• STATIC. Configure the keywords and
parameters in the STATIC section of this
table.
• DHCPC. Configure the keywords and
parameters in the DHCPC section of this
table.
• PPPoE. Configure the keywords and
parameters in the PPPoE section of this
table.
• PPTP. Configure the keywords and
parameters in the PPTP section of this
table.
You need to confirm your selection by typing
Yes (that is, Yes, and not just Y).
Specifies whether or not your ISP requires
login if the type of ISP connection is PPPoE
or PPTP.
The static IP address.
The subnet mask that is associated with the
static IP address.
The IP address of the ISP gateway.
The IP address of the primary DNS server.
The IP address of the optional secondary
DNS server.
The ISP account name (alphanumeric
string).
The ISP domain name (alphanumeric string).
Specifies whether or not the DHCP
client-identifier option is sent to the ISP
server. By default, the option is not sent.
Specifies whether or not the DHCP
vendor-class-identifier option is sent to the
ISP server. By default, the option is not sent.