Enable And Configure The Dmz Port For Ipv4 And Ipv6 Traffic - NETGEAR ProSafe FVS318N Reference Manual
Wireless-n 8-port gigabit vpn firewall
Hide thumbs
Also See for ProSafe FVS318N:
- Reference manual (425 pages) ,
- Cli reference manual (297 pages) ,
- User manual (17 pages)
Table of Contents
Advertisement
3.
In the Add Secondary LAN IP Address section of the screen, enter the following settings:
•
IPv6 Address. Enter the secondary address that you want to assign to the LAN ports.
•
Prefix Length. Enter the prefix length for the secondary IP address.
4.
Click the Add table button in the rightmost column to add the secondary IP address to the
Available Secondary LAN IPs table.
Repeat
Step 2
Available Secondary LAN IPs table.
Note:
Secondary IP addresses cannot be configured in the DHCP server.
The hosts on the secondary subnets need to be manually configured
with the IP addresses, gateway IP address, and DNS server IP
addresses.
To edit a secondary LAN IP address:
1.
On the LAN Multi-homing screen for IPv6 (see the previous figure), click the Edit button
in the Action column for the secondary IP address that you want to modify. The Edit LAN
Multi-homing screen displays.
2.
Modify the IP address or prefix length, or both.
3.
Click Apply to save your settings.
To delete one or more secondary LAN IP addresses:
1.
On the LAN Multi-homing screen for IPv6 (see the previous figure), select the check box
to the left of each secondary IP address that you want to delete, or click the Select All
table button to select secondary IP addresses.
2.
Click the Delete table button.
Enable and Configure the DMZ Port for IPv4 and IPv6
Traffic
The demilitarized zone (DMZ) is a network that, by default, has fewer firewall restrictions than
the LAN. The DMZ can be used to host servers (such as a web server, FTP server, or email
server) and provide public access to them. The rightmost LAN port on the wireless VPN
firewall can be dedicated as a hardware DMZ port to safely provide services to the Internet
without compromising security on your LAN.
By default, the DMZ port and both inbound and outbound DMZ traffic are disabled. Enabling
the DMZ port and allowing traffic to and from the DMZ increases the traffic through the WAN
ports.
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
and
Step 3
for each secondary IP address that you want to add to the
LAN Configuration
82
Advertisement
Table of Contents
Troubleshooting
