NETGEAR ProSafe FVS318N Cli Reference Manual page 162

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Keyword (might consist of two
separate words)
Syslog server
syslog_server
syslog_severity
Command example:
FVS318N> system logging remote configure
system-config[logging-remote]> log_identifier FVS318N-Bld3
system-config[logging-remote]> email_logs_enable Y
system-config[logging-remote]> email_server SMTP.Netgear.com
system-config[logging-remote]> return_email FVS318N@netgear.com
system-config[logging-remote]> send_to_email admin2@netgear.com
system-config[logging-remote]> smtp_custom_port 2025
system-config[logging-remote]> smtp_auth type None
system-config[logging-remote]> schedule unit Weekly
system-config[logging-remote]> schedule day Sunday
system-config[logging-remote]> schedule time 00
system-config[logging-remote]> schedule meridiem AM
system-config[logging-remote]> syslog_server fe80::a0ca:f072:127f:b028%21
system-config[logging-remote]> syslog_severity LOG_EMERG
system-config[logging-remote]> save
Related show command:
Associated Keyword to
Select or Parameter to Type
ipaddress or domain name The IP address or domain name of
LOG_EMERG, LOG_ALERT,
LOG_CRITICAL,
LOG_ERROR, LOG_WARNING,
LOG_NOTICE, LOG_INFO, or
LOG_DEBUG
show system logging remote setup
System Mode Configuration Commands
162
Description
the syslog server.
The syslog severity level. The
keywords are self-explanatory.
Note: All the logs with a severity
that is equal to and above the
severity that you specify are logged
on the specified syslog server. For
example, if you select
LOG_CRITICAL as the severity,
then the logs with the severities
LOG_CRITICAL, LOG_ALERT, and
LOG_EMERG are logged.