NETGEAR ProSafe FVS318N Cli Reference Manual page 164

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Keyword
country
mode
channel_spacing
channel
Associated Keyword to Select or
Parameter to Type
africa, asia,
europe,
country
middle_east,
keyword
oceania, or
united_states
g_and_b, g_only, ng, or n_only
20-40MHz or 20MHz
auto or the keyword for a specific
channel.
Note: The available channels
depend on the country selection
and are displayed on the CLI
screen.
Dot11 Mode Configuration Commands
164
Description
After you have selected a geographical
region, select a predefined country name
within the selected region. For a list of
countries that you can enter, see
The wireless mode in the 2.4-GHz band:
• g_and_b. In addition to 802.11b- and
802.11g-compliant devices,
802.11n-compliant devices can connect
to the wireless access point because
they are backward compatible.
• g_only. 802.11g- and 802.11n-compliant
devices can connect to the wireless
access point, but 802.11n-compliant
devices function below their capacity in
802.11g mode. 802.11b-compliant
devices cannot connect.
• ng. This is the default setting. 802.11g-
and 802.11n-compliant devices can
connect to the wireless access point.
802.11b-compliant devices cannot
connect.
• n_only. Only 802.11n-compliant devices
can connect to the wireless access
point.
For the ng and n_only modes, the channel
spacing:
• 20-40MHz. Select this option to improve
the performance. Some legacy devices
can operate only at 20 MHz.
• 20MHz. Select this option if your network
includes legacy devices.
Note: The channel spacing is fixed at
20 MHz for the g_and_b and g_only
modes.
The 2.4 GHz channel that is used by the
radio. Either select auto to enable the
wireless access point to select its own
channel, or select a specific channel.
Table 13.