NETGEAR ProSafe FVS318N Cli Reference Manual page 251

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
show net ethernet {interface name | all}
This command displays the MAC address and VLAN status for a single or all Ethernet
interfaces:
FVS318N> show net ethernet eth1
MAC Address: AA:AB:BB:00:00:02
VLAN ID: 1
Interface Name: eth1
VLAN Enabled: N
Native VLAN: N
FVS318N> show net ethernet all
Ethernet Interfaces
___________________
VLAN ID Interface Name VLAN Enabled Native VLAN
_______ ______________ ____________ ___________
1 eth0
1 eth1
show net lan ipv4 advanced setup
This command displays the advanced IPv4 LAN configuration:
LAN Advanced Setup
__________________
VLAN MAC Settings:
MAC Address for VLANs: Same
Advanced Settings:
ARP Broadcast: Enabled
show net lan available_lan_hosts list
This command displays the IPv4 hosts (that is, the known computers and devices in the
LAN):
List of Available Lan Hosts
___________________________
N N
N N
Show Commands
251