NETGEAR ProSafe FVS318N Cli Reference Manual page 89

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Keyword (might consist of two
separate words)
Service name, action, and schedule
service_name
default_services
service_name
custom_services
action
schedule
LAN server addresses, port number translation, and WAN destination addresses
send_to_lan_server
send_to_lan_server_start_ip
send_to_lan_server_end_ip
Associated Keyword to Select or
Parameter to Type
ANY, AIM, BGP, BOOTP_CLIENT,
BOOTP_SERVER, CU-SEEME:UDP,
CU-SEEME:TCP, DNS:UDP,
DNS:TCP, FINGER, FTP, HTTP,
HTTPS, ICMP-TYPE-3,
ICMP-TYPE-4, ICMP-TYPE-5,
ICMP-TYPE-6, ICMP-TYPE-7,
ICMP-TYPE-8, ICMP-TYPE-9,
ICMP-TYPE-10, ICMP-TYPE-11,
ICMP-TYPE-13, ICQ, IMAP2,
IMAP3, IRC, NEWS, NFS, NNTP,
PING, POP3, PPTP, RCMD,
REAL-AUDIO, REXEC, RLOGIN,
RTELNET, RTSP:TCP, RTSP:UDP,
SFTP, SMTP, SNMP:TCP, SNMP:UDP,
SNMP-TRAPS:TCP,
SNMP-TRAPS:UDP, SQL-NET,
SSH:TCP, SSH:UDP, STRMWORKS,
TACACS, TELNET, TFTP, RIP, IKE,
SHTTPD, IPSEC-UDP-ENCAP,
IDENT, VDOLIVE, SSH, SIP-TCP, or
SIP-UDP
custom service name
ALWAYS_BLOCK, ALWAYS_ALLOW,
BLOCK_BY_SCHEDULE_ELSE_ALLOW,
or ALLOW_BY_SCHEDULE_ELSE_BLOCK
Schedule1, Schedule2, or
Schedule3
ANY, SINGLE_ADDRESS, or
ADDRESS_RANGE
ipaddress
ipaddress
Security Mode Configuration Commands
89
Description
The default service and protocol to
which the firewall rule applies.
The custom service that you have
configured with the security
services add command.
The type of action to be enforced
by the rule.
The schedule, if any, that is
applicable to the rule.
The type of LAN address.
There are two options:
• The IP address if the
send_to_lan_server
keyword is to SINGLE_ADDRESS.
• The start IP address if the
send_to_lan_server
keyword is set to
ADDRESS_RANGE.
The end IP address if the
send_to_lan_server keyword
is set to ADDRESS_RANGE.