Configure Mode Config Operation On The Wireless Vpn Firewall - NETGEAR ProSafe FVS318N Reference Manual
Prosafe wireless-n 8-port gigabit vpn firewall
Hide thumbs
Also See for ProSafe FVS318N:
- Reference manual (414 pages) ,
- Cli reference manual (297 pages) ,
- User manual (17 pages)
Table of Contents
Advertisement
Configure Mode Config Operation on the Wireless VPN
Firewall
To configure Mode Config on the wireless VPN firewall, first create a Mode Config record,
and then select the Mode Config record for an IKE policy.
To configure Mode Config on the wireless VPN firewall:
1.
Select VPN > IPSec VPN > Mode Config. The Mode Config screen displays:
Figure 145.
As an example, the screen shows two Mode Config records with the names EMEA Sales
and NA Sales:
•
For EMEA Sales, a first pool (172.16.100.1 through 172.16.100.99) and second pool
(172.16.200.1 through 172.16.200.99) are shown.
•
For NA Sales, a first pool (172.25.100.50 through 172.25.100.99), a second pool
(172.25.210.1 through 172.25.210.99), and a third pool (172.25.220.80 through
172.25.220.99) are shown.
2.
Under the List of Mode Config Records table, click the Add table button. The Add Mode
Config Record screen displays:
Virtual Private Networking Using IPSec and L2TP Connections
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
244
Advertisement
Table of Contents
Troubleshooting
