Tasks To Set Up An Ipv6 Internet Connection To Your Isp; Configure The Ipv4 Internet Connection And Wan Settings - NETGEAR ProSafe FVS318N Reference Manual

3. (Optional) Configure Dynamic DNS on the WAN port. If required, configure your fully
qualified domain names: See
4. (Optional) Configure the WAN options. If required, change the factory default MTU size,
port speed, and MAC address of the wireless VPN firewall: See
Options and Other Tasks
need to change the settings.

Tasks to Set Up an IPv6 Internet Connection to Your ISP


Complete these four tasks:
1. Configure the IPv6 WAN mode. Select the IPv4 / IPv6 mode to support both IPv4 and
IPv6 traffic: See
2. Configure the IPv6 Internet connection to your ISP. Connect to your ISP: See one of the
following sections:
• Use a DHCPv6 Server to Configure an IPv6 Internet Connection
• Configure a Static IPv6 Internet Connection
• Configure a PPPoE IPv6 Internet Connection
3. Configure the IPv6 tunnels. Enable 6to4 tunnels and configure ISATAP tunnels: See
Configure 6to4 Automatic Tunneling
Tunneling on page 47.
4. (Optional) Configure Stateless IP/ICMP Translation (SIIT). Enable IPv6 devices that do
not have permanently assigned IPv4 addresses to communicate with IPv4-only devices:
See Configure Stateless IP/ICMP Translation
5. (Optional) Configure the WAN options. If required, change the factory default MTU size,
port speed, and MAC address of the wireless VPN firewall: See
Options and Other Tasks
need to change the settings.

Configure the IPv4 Internet Connection and WAN Settings

• Configure the IPv4 WAN Mode
• Let the Wireless VPN Firewall Automatically Detect and Configure an IPv4 Internet
Connection
• Manually Configure an IPv4 Internet Connection
• Configure Dynamic DNS
To set up your wireless VPN firewall for secure IPv4 Internet connections, you need to
determine the IPv4 WAN mode (see the next section) and then configure the IPv4 Internet
connection to your ISP on the WAN port. The web management interface offers two
connection configuration options, discussed in the following sections:
• Let the Wireless VPN Firewall Automatically Detect and Configure an IPv4 Internet
on page 28
Connection
• Manually Configure an IPv4 Internet Connection
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Configure Dynamic DNS
on page 50. These are advanced features, and you usually do not
Configure the IPv6 Routing Mode
on page 50. These are advanced features, and you usually do not
IPv4 and IPv6 Internet and Broadband Settings
on page 35.
on page 38.
on page 41
on page 43
on page 46 and Configure ISATAP Automatic
on page 49.
on page 31
26
Configure Advanced WAN
on page 39
Configure Advanced WAN