How To Configure The Internet Connection Manually; Domain Name Server - NETGEAR FWG114P Reference Manual

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P

How to Configure the Internet Connection Manually

You can manually configure the router using the Basic Settings menu shown in
these steps:
Click the Basic Settings link on the Setup menu.
1.
If your Internet connection does not require a login, click No at the top of the Basic Settings
2.
menu and fill in the settings according to the instructions below. If your Internet connection
does require a login, click Yes, and skip to step 3.
Enter your Account Name (may also be called Host Name) and Domain Name.
a.
These parameters may be necessary to access your ISP's services such as mail or news
servers.
Internet IP Address:
b.
If your ISP has assigned you a permanent, fixed (static) IP address for your PC, select
"Use static IP address". Enter the IP address that your ISP assigned. Also enter the
netmask and the Gateway IP address. The Gateway is the ISP's router to which your router
will connect.
Domain Name Server (DNS) Address:
c.
If you know that your ISP does not automatically transmit DNS addresses to the router
during login, select "Use these DNS servers" and enter the IP address of your ISP's
Primary DNS Server. If a Secondary DNS Server address is available, enter it also.
Note: If you enter an address here, restart the computers on your network so that these
settings take effect.
Gateway's MAC Address:
d.
This section determines the Ethernet MAC address that will be used by the router on the
Internet port. Some ISPs will register the Ethernet MAC address of the network interface
card in your PC when your account is first opened. They will then only accept traffic from
the MAC address of that PC. This feature allows your router to masquerade as that PC by
"cloning" its MAC address.
To change the MAC address, select "Use this Computer's MAC address." The router will
then capture and use the MAC address of the PC that you are now using. You must be
using the one PC that is allowed by the ISP. Or, select "Use this MAC address" and enter
it.
Click Apply to save your settings.
e.
If your Internet connection does require a login, fill in the settings according to the instructions
3.
below.
3-12 Connecting the FWG114P to the Internet
M-10177-01
Figure 3-10 using