Riso EZ Series User Manual page 68

REG-LL_EN.book Page 68 Wednesday, September 14, 2011 12:03 PM
Advanced Features
Item
Changeable Items
No.
14 Minimum print quantity
Specify the minimum number of
copies to be printed from one master.
If a number lower than the specified
minimum number is entered, the
master-making process is not
executed.
You can lock and prevent this setting
from being changed. For more
information, consult your dealer (or
authorized service representative).
15 Beep sound
Specify how an alarm should sound
when keys are operated or errors occur.
• Level 2
A beep sounds at all preset occasions;
for example at the time of key
operations and event generation/end.
• Level 1
A beep sounds only at the time of
error occurrence, setting
completion and pulling-out
enabled.
• Level 0
A beep does not sound at any occasions.
16 Reservation Period
Specify the amount of time for blocking
document data output from a computer
when the machine is not operated.
17 Semi-Auto(ADF unit)*
with the optional ADF unit)
With "ON" selected, if an original
exists in the ADF unit after printing,
the next master-making process is
executed followed by proof copy, and
then machine operation is stopped.
Important!:
• To select "ON" for Semi-Auto, set
Auto-Process to "OFF".
18 Job Separation*
Select "ON" when using an Job
Separator (option).
20 Print Quantity restoration setting*
Set the restoration setting for Print Quantity.
Select "ON" when you want to restore the
Print Quantity after printing is finished.
68
Customizing the Initial Settings [Custom Setting Mode]
0
0
Level 2
OFF
1 (available only OFF
OFF
1
OFF
1
Parameter Selection
1 2 3
10 20 30
copies copies copies
Level 1 Level 0
15 30 60
seconds seconds seconds
ON
ON
ON
4 5
40 50
copies copies