Setting Up For Scanning Originals; Selecting The Image Processing Mode [Line, Photo, Duo] - Riso EZ Series User Manual

REG-LL_EN.book Page 34 Wednesday, September 14, 2011 12:03 PM
Setting up for
Scanning Originals
Selecting the Image Processing Mode
[Line, Photo, Duo]
In order to make a quality master, select an appropriate mode depending on whether originals contain only text,
photo or both of them.
Press the key to select the Image Pro-
cessing mode.
Each time you press the key, the indicators light in the
order; (Line)→ (Photo)→
The table shows which types of originals are appropri-
ate for each mode.
Type of
Mode
Originals
Only text
contained;
Line e.g., text
document,
newspaper
34

Selecting the Image Processing Mode [Line, Photo, Duo]

(Duo)
Scanning Level
Adjustment
1-5 AUTO
Available Available
Type of
Mode
Originals
Only photos Available
Photo
contained
Both text Available
Duo and photos
contained
Important!:
• With the Photo mode or Duo mode selected, you can
process images with a dot screening when printing.
(For EZ3XX only)
p.36
• With the Photo mode or Duo mode selected, you
cannot select "Auto" for the scanning level. Perform
manual adjustment.
p.39
• You cannot use the Image Processing mode and
Pencil mode together.
Note:
• Select the Pencil mode when printing from an original
written with a pencil.
p.35
• The Custom Setting mode allows you to change the
initial setting for the Image Processing mode and
Duo mode adjustment.
p.66
• The initial setting is "Line" and the Scanning Level
Adjustment is "AUTO".
If "Line" is changed to another mode and set back to "Line"
again, Scanning Level Adjustment is set to 3 (not AUTO).
Scanning Level
Adjustment
1-5 AUTO
Not
Available
Not
Available