Output The Id Counter Report - Riso EZ Series User Manual

REG-LL_EN.book Page 86 Wednesday, September 14, 2011 12:03 PM
Advanced Features

Output the ID Counter Report

The listing of the use of the machine by all users is printed.
Important!:
• The administrator must be registered in advance in the "Create User". ( p.78)
• Make sure that A4(Letter) paper has been placed in the Paper Feed Tray.
• If executing output when "Management ON/OFF" is "OFF", the machine status during the period "Management
ON/OFF" was "ON" is output.
Note:
• To use the feature of ID Counter Report, the optional RISO PC Interface Card USB2.0 is required. In addition, the
optional RISO Network Card is also required to output the report from E-mail.
• You can set the reminder date.
• You can select outputting method from Printing or E-mail attached.
1
Press the
Its indicator turns on.
Important!:
• If the RISO Network Card (option) is installed,
you will not be able to enter the Custom Setting
mode for up to one minute after turning the
power on.
Note:
• To clear the setting, press the
turn off its indicator.
2
Enter the item number "90" and
press the [
The "ID Counter Report Output" mode is acti-
vated.
86
Setting Up User Management
p.85
key.
key again to
] key.
p.72
3
Press the [ ] key.
The output is executed, and the item number entry
mode is restored.
Important!:
• If you press the key before pressing the
[ ] key, the counting result is not outputted,
and the normal mode is restored.
• If you press the key before pressing the
[ ] key, the counting result is outputted, and
the normal mode is restored.