Riso EZ Series User Manual page 117

REG-LL_EN.book Page 117 Wednesday, September 14, 2011 12:03 PM
Problem
Paper gets jammed in the ADF unit
(Option).
Printed copies are not neatly aligned
in the Paper Receiving Tray.
(The indicator blinks frequently.)
Cause
There is any paper caught in the
ADF unit (Option).
The positions of the Receiving Tray
Paper Guides and the Paper
Stopper are inappropriate.
The Paper Feed Pressure
Adjustment Lever is positioned
incorrectly.
The positions of the Paper Jumping
Wings are inappropriate. (For
EZ3XX only)
The Paper Arrangers are not
properly set. (For EZ3XX only)
The corrugators are not properly set.
(For EZ2XX only)
Troubleshooting
Action
Pull the ADF Original Release Lever
to the right or turn the Release
Original Dial and remove the
jammed paper.
ADF Original Release Lever
Original Release Dial
Adjust the Receiving Tray Paper
Guides and the Paper Stopper to the
size of paper. For thick paper,
slightly widen them as necessary.
If you have adjusted the horizontal
position on the Paper Feed Tray,
shift the Receiving Tray Paper
Guides in the same direction.
p.22
If the Paper Feed Pressure
Adjustment Lever is set to "CARD"
( ), printed copies may not be
correctly aligned when using
standard paper.
Set the Paper Feed Pressure
Adjustment Lever to "NORMAL" (
p.20
Position the Paper Jumping Wings
according to the size and thickness
of paper. p.22
Set the Paper Arrangers properly.
p.22
Set the corrugators properly.
Troubleshooting Tips
).
p.22
117