Riso EZ Series User Manual page 91

REG-LL_EN.book Page 91 Wednesday, September 14, 2011 12:03 PM
6
Remove the depleted Master Roll.
Note:
• Dispose the depleted Master Roll according to
the disposal rule of your local community.
p.95
7
Install a new Master Roll.
Remove the shrink package (transparent film)
from the new Master Roll, and place the roll so
that the mark on the master core comes to
the left.
Important!:
• When removing the shrink package, be careful
not to damage the section having the
If that section is bent or the perforated line is
cut, the master roll becomes unavailable.
Replacing and Disposing Consumables
8
Close the Master Roll Holder.
After closing the Master Roll Holder, remove the
wrapper.
9
Insert the leading edge of the Master
Roll into its entrance under the Mas-
ter Guide Flap.
Insert the leading edge until it stops (
If the master is loose, turn the flange at the right
inward to rewind (
mark.
).
).
Replacing the Master Roll
91